Product novelty 08. September 2026
E2 and H2 Peripheral Pumps For MATIC Duo and CLASSIC Duo temperature control units.
Advancing pump technology for temperature control.
With the E2 and H2 peripheral pumps, Tool-Temp is consistently advancing pump technology for temperature control units. The new generation combines higher hydraulic performance with efficient operation, providing additional performance reserves for demanding applications in oil and water operation.
Swiss development and manufacturing
The pumps are fully developed and manufactured in Switzerland. They are installed as standard in temperature control units from the MATIC and CLASSIC Duo series.
E2 pump: More hydraulic performance with the same consumption
The optimised peripheral-wheel design enables significantly higher pressure and flow performance. The new pump generation provides additional reserves, particularly for applications with high pressure losses, complex tool circuits or long line runs.
Compared with the previous E pump, the E2 can deliver up to 53% more pressure performance in oil operation and up to 48% more flow rate in water operation.
This provides more hydraulic performance without requiring a correspondingly higher motor output.
Efficient operation
The optimised hydraulics of the E2 pump also make better use of the drive energy. Up to 16% lower electricity consumption is possible at the same operating point — and correspondingly more in speed-controlled operation.
Also suitable for existing units
The E2 and H2 peripheral pumps can also be used for retrofitting. They are mechanically 1:1 compatible with existing TT and CLASSIC temperature control units.This means existing systems can also benefit from the improved pump technology.
Swiss development and manufacturing
With the E2 and H2, Tool-Temp combines higher hydraulic performance, energy efficiency and easy integration in a new generation of pumps — developed and fully manufactured in Switzerland.
More performance. Less energy. For more efficient temperature control processes.
With the E2 and H2 peripheral pumps, Tool-Temp is consistently advancing pump technology for temperature control units. The new generation combines higher hydraulic performance with efficient operation, providing additional performance reserves for demanding applications in oil and water operation.
Swiss development and manufacturing
The pumps are fully developed and manufactured in Switzerland. They are installed as standard in temperature control units from the MATIC and CLASSIC Duo series.
E2 pump: More hydraulic performance with the same consumption
The optimised peripheral-wheel design enables significantly higher pressure and flow performance. The new pump generation provides additional reserves, particularly for applications with high pressure losses, complex tool circuits or long line runs.
Compared with the previous E pump, the E2 can deliver up to 53% more pressure performance in oil operation and up to 48% more flow rate in water operation.
This provides more hydraulic performance without requiring a correspondingly higher motor output.
Efficient operation
The optimised hydraulics of the E2 pump also make better use of the drive energy. Up to 16% lower electricity consumption is possible at the same operating point — and correspondingly more in speed-controlled operation.
Also suitable for existing units
The E2 and H2 peripheral pumps can also be used for retrofitting. They are mechanically 1:1 compatible with existing TT and CLASSIC temperature control units.This means existing systems can also benefit from the improved pump technology.
Swiss development and manufacturing
With the E2 and H2, Tool-Temp combines higher hydraulic performance, energy efficiency and easy integration in a new generation of pumps — developed and fully manufactured in Switzerland.
More performance. Less energy. For more efficient temperature control processes.
Tool-Temp AG
Contact
Ms. Manuela Lang