ROLF SCHLICHT GmbH

Exhibition hall A6 – Booth A6-6111


Contact

ROLF SCHLICHT GmbH
Grootkoppel 16
23858 Reinfeld
Germany

+49 4533 6063 100

+49 4533 6063 101



Product overview

Injection moulding machines
  • Injection moulding machines for rubber and elastomers
  • Injection moulding machines for thermoplastics

Press systems
  • Forming presses and injection presses

Extruders and extrusion systems
  • Twin-screw extruders
  • Single-screw extruders
  • Extrusion follow-up machines
  • Extrusion systems for flat film and plates
  • Extrusion systems for slit films, mono and multi-filaments
  • Extrusion systems for rubber
  • Extrusion systems for pipe and profiles
  • Extrusion systems for laminating and coating
  • Extrusion systems for encasing pipes and cables
  • Extrusion tools

Machines for producing foams and processing reaction resins
  • Machines for producing foams and foamed parts
  • Splitting machines, peeling machines

Machines and equipment for purification and recycling
  • Purification and recycling systems
  • Discontinuous mixers for solids
  • Discontinuous mixers for liquids
  • Granulating machines

Processing and follow-up machines
  • Cutting, slitting and coiling machines
  • Coiling machines for the production of pipe and hollow bodies

Machines and equipment for finishing, decoration, printing and marking
  • Coating systems
  • Flocking machines and systems
  • Laminating systems
  • Marking and identification machines

Tools, components
  • Hot-runners systems
  • Heating elements
  • Machine cutters

Peripheral devices
  • Dosing equipment
  • Coolers, cooling equipment, cooling systems

Devices for measuring, control, regulating and testing
  • Measuring and test equipment

Calendars
  • Calendars

Product Innovations

ROLF SCHLICHT GmbH - RS MULTICUT Heating tunnel

The heating tunnel was designed to heat rigid plastic pipes and profiles before cutting.

Hard materials sometimes have the property of splintering or generating cutting chips when they are chipped when cold.

By heating the material in the inline process, we achieve a clean and chip-free cut. There is no need for expensive post-processing.

Our heating tunnel works ideally in connection with our RS MULTICUT rotary cutter
MC-NG.

In this application, the preheating sections we manufacture have 2 heaters each 3,000 watts. The heat supply is regulated depending on the speed. In addition, an extremely fast on / off function is integrated so that the amount of heat can be controlled precisely.

Different heat levels are available for different polymer types, product sizes and line speeds.

All of our heating tunnels are fully safeguarded to protect the user and avoid the risk of fire.

Suitable polymers: impact-resistant, rigid PVC, HDPE, PB, PP.

ROLF SCHLICHT GmbH - RS MULTICUT Heating tunnel
RS MULTICUT Heating tunnel

Product group:

Machines and equipment for processing, recycling


Contact

Mr. Marc de Nooijer

+49 4533 6063 100


ROLF SCHLICHT GmbH - RS POWDERTECH powder coating machine - type TALKATOR NG SPC + DR

The TALKATOR “SPC” series for cables, hoses, wires and profiles is settled below the RSC NG line and shows its strength in slow-running, simple cable production as well as in the production of strands and profiles in the extrusion sequence in the rubber industry.

Especially in the rubber industry the TALKATOR has significant cost advantages, as the processes run at low speeds. This is made possible by the application of the RS AirStreamTechnology, which avoids expensive brush solutions in most applications, but still provides very good coating results.

The powdering is done by 1-2 AST powder guns connected to up to two jet pumps. The newly developed coating technology RS AirStreamTechnology is able to achieve a very fine and even coating on the product at production speeds of up to 100 m/min, even without electrostatics.


The TALKATOR NG DR (drum roll) is used in the powdering of rubber molded parts or within the granule production.

Very good and fine coatings are achieved. As with the PBA/RSC/RSC NG, which have been successful for many years, the use of the newly developed RS filter system ensures dust-free powdering.

There are cost advantages in the production, since the system can be integrated online into the continuous manufacturing process. Time-consuming manual powdering processes are no longer necessary.

ROLF SCHLICHT GmbH - RS POWDERTECH powder coating machine - type TALKATOR NG SPC + DR
RS POWDERTECH TALKATOR NG SPC

Product group:

Processing machines


Contact

Mr. Hans-Günter Mehls

+49 4533 6063 100


ROLF SCHLICHT GmbH - RS POWDERTECH powder coating machine - type RSC NG

For 60 years, ROLF SCHLICHT GmbH has been the world’s leading and most innovative supplier of RS POWDERTECH powdering machines in the cable and rubber industry with over 1500 satisfied customers in over 60 countries. A pioneer in the industry – often copied, but unmatched in quality!

Since March 2019 ROLF SCHLICHT GmbH has been supplying a new version of the RS POWDERTECH machine, type RSC-NG. This machine is the result of a consistent further development of the precursor machines - from the Talk-O-Mat till today. The new development of the electrostatics and the filter system have succeeded in further simplifying the machine, reducing consumption, reducing costs and further improving the well-known powdering quality.

The modular system allows customization for the specific application.

We also provide service, spare parts, testing, maintenance, retrofitting and refurbishment.

ROLF SCHLICHT GmbH - RS POWDERTECH powder coating machine - type RSC NG
RS POWDERTECH RSC NG Modular system

Product group:

Processing machines


Contact

Mr. Hans-Günter Mehls

+49 4533 6063 100


ROLF SCHLICHT GmbH and Friul Filiere SpA, Italy - Downstream Equipment

Friul Filiere SpA is an Italian company that was founded in 1978 and is known worldwide for the production of complete extrusion lines and tools for pipes and profiles made of all thermoplastic materials.
ROLF SCHLICHT GmbH in Reinfeld is the sales partner of Friul Filiere SpA for Germany, Austria and Switzerland https://schlicht-gmbh.de/en/home/ .

As an international company, Friul Filiere SpA offers customers individual, tailor-made products, but also competitive standard solutions in the field of profile and pipe extrusion are part of the program.
Friul Filiere SpA has particularly achieved excellent performance in the extrusion of all types of pipes and many plastic profiles including:

• Pipes in PA6-PA11 with the highest speed ever achieved
• Automotive - technical profiles
• TPU / PVC coating on metal pipes
• Alveolar tubes in PP for agriculture
• Medical tubes
• PC profiles
• Thermal insulation in PA66
• TPU profiles
• ABS co-extruded aluminum foil
• Flexible sheathing of copper strips
• PS foam profiles
• Electrified profiles

The production program also includes single-screw extruders, twin-screw extruders (conical and parallel), co-extruders and complete downstream units. Complete systems including know-how and recipe are supplied.
Visit us on the homepage of the Fakuma Virtual 2020 https://www.fakuma-messe.de/en/fakuma-virtual/ or at
https://schlicht-gmbh.de/en/home/

ROLF SCHLICHT GmbH and Friul Filiere SpA, Italy - Downstream Equipment
Friul Filiere SpA - Single strand Omega S

Product group:

Extruders and Extrusion plants


Contact

Mr. Hans-Günter Mehls

+49 4533 6063 100


ROLF SCHLICHT GmbH - RS MULTICUT Combi-cutting machine - type CC NG

The combi-cutting system consists of the tried and tested caterpillar take-off RB NG and the rotary cutter MC NG from the RS MULTICUT machine series for cutting plastic and rubber profiles / hoses to length.

In the caterpillar take-off, a servo motor with digital drive controllers guarantees a precise and constant transport speed of the product. The speed signal is processed internally to control the integrated rotary cutter.

The downstream rotary cutter works by means of an electronic cam disc application. Based on the production speed, the selected cutting speed and the target length, an optimized movement profile of the cutting blade is continuously calculated. This way the product is cut vertically and neatly between the two coordinated product guide bushes at max. cutting speed. This cam disc application combines the advantages of cyclical and continuous operation and guarantees an optimized length precision. All process-related parameters can be changed on the control panel during operation. The MC NG can be supplied for dry and wet cutting.

The combi-cutting system can optionally be used in positioning mode. In this operating mode, the cut takes place when the product is at a standstill. Made of stainless steel or in conformity with FDA.

ROLF SCHLICHT GmbH - RS MULTICUT Combi-cutting machine - type CC NG
RS MULTICUT combi cutting machine type CC NG

Product group:

Processing and follow-up machines


Contact

Mr. Mark de Nooijer

+49 4533 6063 100


ROLF SCHLICHT GmbH - RS MULTICUT Cutting machines - type RB NG caterpillar take-off

The RS MULTICUT caterpillar take-off units, type RB NG are characterized by their robust construction and the most modern technology:

• state-of-the-art control,
• with quick change of the discharge belts without tools,
• state-of-the-art drive technology through servo direct drives,
• wide delivery program with caterpillar belts of 50-200 mm width,
• tape or contact lengths of 250/600/1000 mm as well as special designs,
• special equipment according to customer requirements,
• FDA compliant,
• special material guides,
• measuring and detection systems, slitting devices etc.,
• picking devices for fast and automatic removal of cut parts into collecting trays, containers, boxes or bags.

The RS MULTICUT RB NG caterpillar is suitable for cutting profiles, hoses, extruded profiles, pipes and cables with no slippage or deformation. The belts are driven by servo motors. In addition, an upper drive can be selected, to achieve a slip-free and deformation-free take off and an increased pull off force of the products. The upper belt can be adjusted manually using a handwheel or electrically to the product-dependent gap size. The upper belt can be pneumatically lifted at the push of a button for better product introduction. Different belt materials, depending on the product, guarantee careful pulling and transport.

ROLF SCHLICHT GmbH - RS MULTICUT Cutting machines - type RB NG caterpillar take-off
RS MULTICUT RB NG caterpillar take-off

Product group:

Processing and follow-up machines


Contact

Mr. Mark de Nooijer

+49 4533 6063 100


ROLF SCHLICHT GmbH - RS MULTICUT Cutting machines - type MCS modular cutting system

The entire product range of the RS MULTICUT cutting machines from ROLF SCHLICHT GmbH has been completely revised and partly completely redesigned.
The area of application for the systems is the production area of plastic and rubber extrusion for the production of hoses, pipes, profiles, strips from the smallest diameter ranges down to less than 1 mm in medical technology up to pipes with a diameter of approx. 100 mm. However, all other cutting tasks are also possible, from confectionery to sliding strips.
The systems work in the extrusion line or outside the line and are adapted to the wishes and needs of the customers in order to achieve the best possible effectiveness.

The new machine type MCS is characterized by its modular design and can therefore be used flexibly for different applications.
The MCS can be supplied with different belt widths and contact lengths. The machine is delivered as standard with a separation module according to customer's choice, whereby the separation module can be changed at any time.
The customer is extremely flexible thanks to simple retrofitting and can switch from a hose cut to a normal die cut. With this system, various components can be combined with one another, tailored to specific customer requirements. This flexibility enables the processing of the most varied of materials and profiles. Several work steps can be carried out at the same time.

Main features:

• MCS with a modular concept.
• Integration of several tools in one machine for complex profile cuts and machining.
• Wide range of available cutting technologies.
• Quickly changeable tools.

ROLF SCHLICHT GmbH - RS MULTICUT Cutting machines - type MCS modular cutting system
RS MULTICUT MCS modular cutting system

Product group:

Processing and follow-up machines


Contact

Mr. Mark de Nooijer

+49 4533 6063 100


ROLF SCHLICHT GmbH - RS MULTICUT Cutting machines - type MC NG rotary cutter

The entire product range of the RS MULTICUT cutting machines from ROLF SCHLICHT GmbH has been completely revised and partly completely redesigned.
The field of application for the systems is the production range of plastic and rubber extrusion for the production of hoses, pipes, profiles, strips from the smallest diameter ranges down to less than 1 mm in medical technology up to pipes with a diameter of approx. 100 mm. But all other cutting jobs are also possible, from confectionery to sliding strips.
The systems work in the extrusion line or outside the line and are adapted to the wishes and needs of the customers in order to achieve the best possible effectiveness.

The MC NG is a rotary cutter for the precise cutting of soft and semi-hard extrudates up to diameters of 25 - 100 mm. The product is passed through two quickly exchangeable cutting bushes, each equipped with a monitoring sensor. The speed depends on the selected product length, the cutting speed of the cutting blade and the line speed, which can be up to 200 m / min. The position of the rotating knife is continuously monitored by the controller. It accelerates to max. cutting speed for cutting, which means a minimum blocking time of the product at max. cutting energy. Cutting frequencies of up to 3,000 cuts / min can be achieved. Depending on the profile being cut and the hardness of the material different cutting blades are used.
The MC NG can be made of stainless steel or FDA-compliant and can be supplied for dry and wet cutting.
The machine is equipped with a Lenze control and guarantees optimal length precision. All process parameters can be entered using a swiveling panel.
The rotary cutter can optionally be delivered movable so that it can be used in the production line quickly and without great set-up effort.

ROLF SCHLICHT GmbH - RS MULTICUT Cutting machines - type MC NG rotary cutter
RS MULTICUT MC NG

Product group:

Processing and follow-up machines


Contact

Mr. Mark de Nooijer

+49 4533 6063 100


ROLF SCHLICHT GmbH - RS MULTICUT Cutting machines - type OC NG orbital cutter

The ROLF SCHLICHT GmbH product range includes system solutions for a wide range of cutting jobs. The entire product range of the RS MULTICUT cutting machines has been completely revised and partly completely redesigned.

The range of application for the RS MULTICUT systems is the production field of plastic and rubber extrusion for the manufacturing of hoses, pipes, profiles, strips from the smallest diameter ranges down to 1 mm in medical technology up to pipes with a diameter of approx. 100 mm. However, all other cutting jobs are also possible, from confectionery to sliding strips.

The systems work in the extrusion line or outside the line from the coil, from the coil bundle or from the pallet and are adapted to the wishes and needs of the customers in order to achieve the best possible effectiveness.

Cutting to length, cutting, cutting off, pull off, transport with or without tension, line-independent work by means of loop controls, discharge, blow off or throw off, collection and sorting in pans, cartons, boxes or bags.

The different feed and discharge systems and picking devices are made according to customer requirements.

RS MULTICUT Orbitalschneider – type OC NG

The completely redesigned OC NG replaces the old generation OC-15 / OC-65. The OC NG is an "on the fly" cutting system for precise, fast and clean cutting of semi-hard and hard pipes made of plastic, rubber, plastic composite with aluminum or copper pipe inside or rubber with Kevlar etc. The system is characterized by a clean, chip-free, right-angled cut.
All important cutting parameters can be adjusted in the control during the process and optimized according to requirements. The new OC NG is offered in the usual quality, but now at a particularly attractive price. This model is also available as high speed version OC NG hs.

A revolutionary cutting system instead of saws, guillotines etc.

ROLF SCHLICHT GmbH - RS MULTICUT Cutting machines - type OC NG orbital cutter
RS MULTICUT Orbital cutter OC NG

Product group:

Processing machines


Contact

Mr. Mark de Nooijer

+49 4533 6063 100